The thermal conductivity of the cold insulation material at low temperatures (-165 ° C, -150 ° C, -120 ° C, -100 ° C, -50 ° C, -40 ° C) was tested according to methods such as GB/T 10294-2008 and ASTM C177. Thermal conductivity is the most basic performan
In the power industry, if there is fire blocking, then there are two main methods, one is to use traditional fireproof materials for sealing, such as organic and inorganic blocking materials, and fireproof coatings. The second is to use some new aerogel f
The integrated aerogel insulation structure system has the following characteristics:1) The design and construction technology is simple and easy to promote and apply in large areas. The load-bearing structure of the cast-in-place concrete frame (frame sh
With the advancement of science, the general heating pipes will be equipped with thermal insulation materials. The purpose of thermal insulation is to reduce the heat transfer from the pipes that convey the heat medium and cause heat loss. The heat preser
Silica aerogel blanket, also known as "blue smoke" and "solid smoke", is the lightest solid material known at present, and it is also a material with good thermal insulation properties so far. Because of its nanoporous structure (1~) 100nm), low densi
1. What is the aerogel insulation outside the wall?As the name suggests, aerogel insulation outside the wall is a kind of insulation method for placing the insulation layer on the outside of the main wall material. This is equivalent to adding protective
Tradematt-Aerogel ceramic thermal insulation blanket to improve heat exchange in furnace and increase fuel and oxygen. The contact area is that the fuel is fully burned, the energy burning rate is increased, more heat is released, and the exhaust gas temp
Aerogel is a high-quality and high-efficiency insulation material with high porosity, which can effectively reduce the solid phase heat conduction of materials. Its pore size is mainly distributed in the mesopores (2-50nm), which effectively inhibits gas
Carbon fiber aerogel is a highly water-absorptive material that is non-toxic, natural, and recyclable. It can be made from a variety of cellulosic based materials such as cotton or waste paper. Carbon fiber aerogels absorb various organic substances from
Joda is a Chinese company that mainly produces high-tech electrolytic aluminum equipment and new aerogel insulation materials. It integrates R&D, production, sales and service. It has strong technical strength and perfect production management system.
The steel sleeve aerogel insulation pipe is pre-made in the factory, but special attention should be paid to the following problems in design and construction:
In the last 25 years or more, the productivity of the construction industry has been decreasing and the rate of innovation has been low. Today, this trend is being profoundly reversed. From the late 1960s to the beginning of the 21st century, this relativ
With the promotion of energy-efficient buildings in the world, more and more enterprises and research institutions have begun to devote themselves to the research and development and application of building insulation materials, and have vigorously develo
With the widespread use of lithium-ion batteries in mobile phones, computers, and new energy vehicles, the safety of lithium-ion batteries has received increasing attention. As an important component of lithium-ion batteries, separators have an important
The disadvantage of aerogel insulation is that the price is higher and the initial investment is larger. However, due to its excellent aging resistance, dimensional stability, hydrophobicity, thermal insulation properties and ease of construction, it will
Special aerogel materials are an important basis for temperature control. Over the years, Chinese scientists have developed and developed a material called aerogel. This aerogel material is one of the lightest solid insulation materials known in the world
ZhengZhou Joda Technology Co., Ltd. is a high-tech company focusing on the research, development, manufacturing and selling of aerogel insulation materials.Now, we are in Germany International Fair for Insulation Materials/Technology to exhibition our ae
In the case of fire prevention in the electric power industry, there are mainly two specific methods for this purpose. The first is to use traditional fireproof materials for blocking, such as organic and inorganic blocking materials, and fire-retardant c
Aerogel Insulation Coating A shows superior performance at both substrate temperatures. Aerogel Insulation Coating A reduces the skin contact temperature of the 160C substrate by more than 14X: compared to the ceramic coating, and 200X: the skin contact t
In this environment, aerogel insulation refractories can effectively save space means more space for operation, living space and maintenance space. At the same time, for fire safety and personal protection considerations, but also requires insulation mat
SiO2 aerogels materials is a kind of nanostructured material with high transparency and very low thermal conductivity. These properties make this material has a wide range of applications in the construction field. This paper mainly introduces the perform
The use of Aerogel Explosion Proof Panel to armor protection. The armor did not penetrate and there was no significant tear in the welded area, reducing the amount of deformation by 14% compared to unprotected materials. The acceleration generated by the