Fire Protection and Insulation Material for Bridge and Power Industry

Fire blocking, these four words, although it looks simple, but it contains a lot of knowledge, and, so far, has not reached a full extent, so based on this, the following will be We will continue to carry out its learning work so that everyone can have learning content, and further, it can also advance the learning process of this product.

1. In the electric power industry, if there is fire prevention, then what are the options?

In the case of fire prevention in the electric power industry, there are mainly two specific methods for this purpose. The first is to use traditional fireproof materials for blocking, such as organic and inorganic blocking materials, and fire-retardant coatings. The second is the use of new fireproof materials such as aerogel composites.

2. Is there any specific requirement on the fire prevention of the bridge?

The fire blocking on the bridge has certain requirements in terms of specific operations. Therefore, on this issue, the answer is yes, and there is no doubt about it. If, in concrete terms, it is: The spacing between ceilings and fire hoses shall not be less than 100 mm. In the upper part, fireproof panels should be used for plugging. If the requirements are not high, they can also be soft smoke-proof materials.

3. Aluminium veneer, can it be used as a fireproof plugging material? In addition, the pipeline through the fire blocking fire, which kind of material cost is higher?

Aluminum veneers, because of their low melting temperatures, cannot meet the fire protection requirements. Therefore, it cannot be used as a fire blocking material to block fire. The fire blocking of the pipeline through the floor, its relatively high cost of materials, is a fire-resistant coating plate, and, in terms of quality, it is also very good, can have a good fireproof effect.

4. Aluminum Foil Aerogel Insulation Blanket
Aluminum Foil Aerogel Insulation Blanket is currently one of the best materials. Aerogel insulation blanket not only insulates but also flame-retardant (up to 1000 degrees Celsius). The surface of the aluminum foil is fire resistant.