The integrated aerogel insulation structure system has the following characteristics:

1) The design and construction technology is simple and easy to promote and apply in large areas. The load-bearing structure of the cast-in-place concrete frame (frame shear) structure is unchanged. The beam and column and shear wall are still designed according to the current standard. The design standards and calculation software are complete, the construction technology is mature, and it is easy to promote and apply in large areas.

2) Achieve the requirements of integrated technology and achieve the purpose of building insulation and structure with the same life. The longer-term composite thermal insulation outer formwork and the frame (the frame-shear structure of the beam-column and the shear wall and other cast-in-place concrete members are poured together and firmly connected by the nut connecting pieces, achieving synchronous design, synchronous construction, and synchronous acceptance. The technical requirements have achieved the purpose of building insulation and structure with the same life.

3) It adopts multi-layer structure design type, with high strength and good heat preservation and fireproof performance. The integrated aerogel insulation structure has high mechanical strength and can be directly used as an external template. The thermal insulation performance is good and meets the standard requirements of 65% of building energy efficiency.

4) Has good fire performance. The two main facades on the inner and outer sides of the integrated aerogel insulation layer are covered by the cement polymer mortar protective layer, which can effectively avoid the occurrence of fire phenomenon during the construction process. After the completion of the construction project, the outer side of the integrated aerogel insulation layer The protective layer of cement mortar is more than 30mm, and the fireproof performance is greatly improved.

5) Adopt engineering prefabricated form to ensure product engineering quality. The long-term composite integrated aerogel insulation layer is all prefabricated by factory. In the process of use, there is no fraudulent opportunity to eliminate the phenomenon of cutting corners.